Quoi de neuf

English

Q2 / 2020

ADATA relâche la série ISSS333 SSD 2.5’’ avec protection contre la perte du courant (PLP)

Using 3D TLC flash, this new 2.5-inch SATA III solid state drive features polymer capacitors for short circuit protection and PLP. It also supports wide-temperature resistance (-40°C to 85°C) to ensure optimal operation even in the harshest environments. ISSS333 offers LDPC (Low-Density Parity-Check) error correcting code technology to detect and fix a wider range of data errors for more accurate data transfers and a longer SSD lifespan up to par with 2D MLC SSDs.

What’s more, for added reliability and improved cost efficiency, the SSDs implement the company’s proprietary A+SLC technology which utilizes custom NAND Flash firmware with an A+ sorting algorithm to emulate SLC performance.

Capacities range from 64GB to 2TB.

Contact your local Orion Representative for more information.

Delta nouveau bloc d’alimentation 75W Din Rail est 27mm de large

Delta introduces its slimmest model in the Lyte series of DIN rail PSUs at 75W X 27mm wide. It comes with 12V, 24V and 48V output voltages. Based on a convection-cooled design, the Lyte series operates between -20°C to +70°C, with full power available from -10°C to +50°C at 230Vac. It allows cold start at -30°C even in extreme condition. The overcurrent protection is designed to operate in constant current mode, which makes the product suitable for inductive and capacitive load applications.

The 75W Lyte series is NEC Class 2 / Limited Power Source (LPS) certified and meets safety standards IEC 60950-1, IEC/EN/UL 62368-1 and IEC 61010-1.

See Specs.

Contact your local Orion Representative for more information.

Fujipoly SARCON™ boitiers TIM pour des transistors mieux refroidis

Fujipoly® offers a large assortment of box-shaped Sarcon® thermal interface caps to improve transistor cooling and streamline your manufacturing process. These cases are available in standard sizes to fit many transistors and can be custom ordered to your exact specifications. Installation takes seconds by sliding over the heat-generating component. Once fitted, unwanted heat is dissipated to the surrounding environment or nearby heatsinks.

Depending on the power and cooling requirements of your application, these covers are offered in multiple formulations with thicknesses between 0.30 mm and 0.85 mm. Thermal conductivity properties range from 1.1 to 1.7 W/m•K with a corresponding thermal resistance of 0.42 to 1.35°C•in2/W.  

Each case-shaped cover provides additional benefits including electrical insulation and vibration/impact protection.

Contact your local Orion Representative for more information.

Globtek offre un surmoule pour le connecteur type baril Switchcraft® S10

In response to a customer requirement for a clean and professional look and a highly reliable lifespan, GlobTek created a mold tooling for an overmold for Switchcraft Inc.® S10 plug. The Overmold/boot may be molded on PVC or Silicone material cable jackets. The overmold helps the connector withstand thousands of plug/unplug cycles without risk of damage or wear in rugged applications. The overmold and connector combination are designed for use on round UL type 1185 of 2464 wire, with and without a shield.

The cable assembly can be provided as a cable assembly or as an output cord for a GlobTek power supply. Mates with Switchcraft Inc.® models RAPC10/10P, RASPC10P, RASH10/10P, RASM10/10P and RASSM10/10P.

Contact your local Orion Representative for more information.

Hirose introduit un connecteur Push-Push Micro SD avec le plus bas profil sur le marché

Featuring dimensions of 15.30 mm long, 13.40 mm wide and 1.15 mm high, the DM3NW Series is the world’s lowest profile Push-Push MicroSD connector,reducing volumetric space by up to 15% compared to competing products on the market

Specifications include Push/Push type, mating cycle rating of 10,000, card lock mechanism with retention force of 4N and an operating temperature range of -30˚C to +85˚C.

Contact your local Orion Representative for more information.

Johanson Technology relâche une nouvelle antenne miniature UWB + 2.4GHz

Adding more functionality to handheld, worn, portable devices in an ever shirking form factors has limited the antenna performance one achieve on such small devices. These devices such as keyless remote entry (keyfob), portable payment systems, asset tracking, location services need the necessary range to perform correctly in application. To solve these problems Johanson has come out with mini chip antenna p/n: 2450AD18A7250. This component is 3.2×1.6×0.5mm, occupies a total area on the PCB of 12x4mm, and provide excellent UWB + 2.4GHz radiation performance.

See specs. 

Contact your local Orion Representative for more information.

Leadertech offre des joints d’étanchieté EMI pour I/O (Entrée/Sortie) sur l’étagère

With typical performance shielding effectiveness between 80 – 115dB, and supporting frequency range of 20Mhz – 10GHz, Leader Tech offers a variety of I/O gasket cutout options that eliminates gap problems between connector and I/O surfaces.

Materials for the gaskets include conductive elastomers, fabric shielding gaskets and conductive foam, which provide excellent conductivity and shielding effectiveness. Each material provides specific benefits; environmental sealing for elastomers, low cost for fabric shielding gaskets and low compression force for conductive fabric shielding..

Download custom I/O fillable form.

Contact your local Orion Representative for more information.

Ohmite séries TMW/TWW de résistances avec bornes radiales sont offertes dans deux nouveaux boitiers qui supportent 15W & 20W

The Ohmite TWM/TWW series radial terminal power resistors has officially been extended with two new packages for each element type! This product extension now offers packages with wattage ratings of 15 and 20 while also providing up to 750V of voltage handling. These packages respectively carry a resistance range from as low as 0.1Ω up to 200,000 ohms and are recommended for commercial applications looking for an economical option.

See Specs

Contact your local Orion Representative for more information.

Delta ventilateurs utilisent des paliers Superflo™ qui améliorent les conceptions avec paliers à coussinets douilles (Sleeve bearings)

Delta’s Superflo™ Bearing System represents a mechanical advancement in sleeve bearing systems, featuring a permanently lubricated spinning mechanism. The Superflo system includes an anti-gravity oil pump that re-circulates and recycles the oil in a sealed chamber with dual labyrinth seals.

Benefits include greatly reduced friction and noise, better acoustic performance over 2-ball bearing fans at low speed operation, superb anti-shock, wide applicable temperature ranges and an operating life guarantee (L10) 50,000 hours at 40C minimum compared to regular sleeve bearing L10 life of 30,000 hrs @ 40C.

Contact your local Orion Representative for more information.

Hirose connecteur FPC TF13 avec levier arrière diminue l’espace sur les PCB

The TF13 Series is a compact flexible printed circuit (FPC) / flexible flat cable (FFC) connector that offers     a compact design which minimizes PCB mounting area requirements with 0.4 mm pitch, 0.9 mm height, and 3.0 mm mounting depth.

Features includes a unique back flip design which protects the actuator before being mounted to the PCB board, side catchers which provides a superior FPC retention force and prevents misalignment and ensures correct mating.

Available in a number of positions ranging from 6 to 20.

Contact your local Orion Representative for more information.

Globtek PSU 2X4 sans cadre 277/305VAC 40-70W avec homologations globales et LPS / limited power source

GlobTek’s GTM96700-BWWVV-F 40-70W open frame PSUs support 277Vac (RMS) / 305Vac (peak) nominal rated input with output voltages offered from 5VDC to 56VDC, in industry std 2×4″, and 3×5″ form factors.

Available options include Class I and Class II grounding options, numerous grounding configurations such as connected and floating earth. Accessory wiring kits are also available from stock to connect these products to systems. Customization is available upon request.

Standard products are certified to Medical (IEC60601-1), ITE (60950-1), ICT (62368-1) with a Limited power source (LPS) rating.

See Specs

Contact your local Orion Representative for more information.

Delta nouveau PSU 300W sans cadre avec alimentation forcée de 200 %

PJB-24V300W offers a power boost of 200% for 10 seconds. This reserve power allows for reliable startup of electromechanical loads such as motors, pumps and actuators, thus eliminating the need for a higher power rated PSUs, which are generally bigger in size and more expensive.

There is built-in active PFC up to 0.99 and fulfills Harmonic Current Emission according to IEC/EN 61000-3-2. Other features include low leakage and inrush current. There is additional conformal coating on the PCBAs to provide protection against dust and chemical pollutants.

The product is certified for EMI standards according to EN 55032 and EMS according to IEC 61000-6-2. The product conforms to major international safety standards according to IEC 60950-1/62368-1 standards.

Specs: https://www.deltapsu.com/products/open-frame-power-supply/PJB-24V300W

Contact your local Orion Representative for more information.

Hirose série de connecteurs de puissances PQ50/PQW50 combinent conception robuste et flexibilité

Hirose’s PQ50 series rugged high-power connectors for industrial environments are available in lightweight plated plastic resin or zinc die-cast shell with ratings up to 600 V, a rated current of 9 A per pin when all 20 pins are used, or 19 A maximum in single pin configurations.

Supporting an operating temperature range of -40°C to +105°C, it  is available in a waterproof IP65-rated version, PQ50W, for harsh environment applications.

PQ50/PQ50W feature a highly reliable 2-point contact design and a flexible coding key system that prevents incorrect mating,reliable side latch or interlock lever/cam for rugged locking options with a clear tactile click.

The cable clamp design provides a pull strength of 98 N minimum. Offering panel attachment flexibility and simplicity, the same female receptacle supports both front and rear attachment. Ground contacts connect to the plate’s resin shell to quickly and easily provide secure grounding.

See Specs

Contact your local Orion Representative for more information.

Fujipoly Matériaux Thermiques minces Thin Film

Fujipoly® offers a large selection of thin film thermal interface materials. Available in eight formulations, these Sarcon® materials offer versatility in managing heat dissipation while exhibiting useful characteristics such as electrical insulation, and UL94 VO flammability.

The Sarcon® series of thin films range in thickness from 0.15mm to 0.85mm. Depending on the material selected and application thickness, these products will provide a thermal conductivity between 0.9 and 3.0 W/m°K with a thermal resistance between 0.17 and 1.35 °Cin2/W.

Conveniently packaged in rolls and pre-cut sheets, these thin films can be die-cut or trimmed to virtually any size or proprietary shape for the perfect component fit.

Contact your local Orion Representative for more information.

Johanson solutions EMI pour PCB en vedette dans l’article de presse Today’s Motor Vehicles

Eliminating EMI/radio frequency interference (RFI) with traditional methods no longer suffices, given increases in operating circuit frequency – higher frequency noises that expand the affected frequency range – and electronic device miniaturization that shrinks the distance between source and victim.

See enclosed article which addresses how Johanson’s monolithic EMI filters suppress more RFI in a substantially smaller package than common mode chokes, feed-through filters, LC filters or combinations of these.

Johanson Dielectrics provides an online tool that simplifies such choices, see Johanson Dielectrics online
Filter Response Tool.

Contact your local Orion Representative for more information.

Globtek adaptateurs de courant 6W et 18W multi-fiches sont offerts avec protections IP54 et IP55

GlobTek’s 6W GTM96060-06VV-Q and 18W GTM96180-18VV H/M interchangeable wall plug in (“multiplug”) power supplies offer various degrees of IP 5x, with and without LED indicators.

These PSUs are available in a wall plug in changeable blade housing with plug options for all countries and  are certified for IEC 60601-1 Medical Safety and EMC (4th edition, 2MOPP), IEC 60950-1 Information Technology Equipment, IEC 62368-1 Audio/video, information and communication technology equipment, UL1310 Class 2 Power Unit, and IEC 60335-1 Safety of household and similar electrical appliances.

The models which have an output current rating of 6A or less are all rated for Limited Power Source (LPS) application. The family also complies with the Latest Level VI and CoC/EuP international standards.

Contact your local Orion Representative for more information.

Hirose s’associe avec Amphenol pour la série de connecteurs ix Industrial™

Futher establishing the ix Industrial™ series for next generation Ethernet connectivity solutions, and for EMC resistant IEC 61076-3-124 designs and Cat.6A high speed performances, Hirose announces their partnership on the release of ix Industrial™ connectors by Amphenol.
The ix Industrial™ has been adopted due to its space-saving and reliable Ethernet connection design for smart factory equipment including Servo Drives and Robot Controllers. In the machine vision market, the ix Industrial™ has been certified as a GigE Vision® standard connector..
Hirose’s ix Industrial™, while already compatible with Harting’s ix Industrial™ connectors, is also intermatable with Amphenol’s ix Industrial™ interface.

Contact your local Orion Representative for more information